/*
* File: sdcard.c
* Author: torsten.roemer@luniks.net
*
* Thanks to http://rjhcoding.com/avrc-sd-interface-1.php ff.
*
* Created on 24. Februar 2024, 00:13
*/
#include "sdcard.h"
/**
* Transmits the given command, argument and CRC value.
*
* @param command
* @param argument
* @param crc
*/
static void command(uint8_t command, uint32_t argument, uint8_t crc) {
// 6-bit command, start bit is always 0, transmitter bit is 1 (host command)
transmit(command | 0x40);
transmit(argument >> 24);
transmit(argument >> 16);
transmit(argument >> 8);
transmit(argument);
// 7-bit crc, end bit is always 1
transmit(crc | 0x01);
}
/**
* Reads an R1 response and returns it.
*
* @return R1
*/
static uint8_t readR1(void) {
uint8_t i = 0;
uint8_t response;
// poll up to 8 times for response
while ((response = transmit(0xff)) == 0xff) {
i++;
if (i > 8) {
break;
}
}
return response;
}
/**
* Reads an R3/R7 response into the given array of 5 bytes.
*
* @param R3/R7
*/
static void readR3_7(uint8_t *response) {
// read R1
response[0] = readR1();
// stop reading if R1 indicates an error
if (response[0] > 0x01) {
return;
}
response[1] = transmit(0xff);
response[2] = transmit(0xff);
response[3] = transmit(0xff);
response[4] = transmit(0xff);
}
/**
* SPI selects the SD card with extra clocks before and after.
*/
static void select(void) {
transmit(0xff);
sdCardSel();
transmit(0xff);
}
/**
* SPI deselects the SD card with extra clocks before and after.
*/
static void deselect(void) {
transmit(0xff);
sdCardDes();
transmit(0xff);
}
/**
* Supplies ramp up time.
*/
static void powerOn(void) {
_delay_ms(100);
deselect();
// supply at least 74 clocks
for (uint8_t i = 0; i < 10; i++) {
transmit(0xff);
}
}
/**
* Sends CMD0 to set idle SPI mode and returns the R1 response.
*
* @return R1
*/
static uint8_t sendIdle(void) {
select();
command(CMD0, CMD0_ARG, CMD0_CRC);
uint8_t response = readR1();
deselect();
return response;
}
/**
* Sends CMD8 to check version and voltage and reads the R7 response
* into the given array of 5 bytes.
*
* @param R7
*/
static void sendIfCond(uint8_t *response) {
select();
command(CMD8, CMD8_ARG, CMD8_CRC);
readR3_7(response);
deselect();
}
/**
* Sends CMD55 to tell that an app command is next and returns the R1 response.
*
* @return R1
*/
static uint8_t sendApp(void) {
select();
command(CMD55, CMD55_ARG, CMD55_CRC);
uint8_t response = readR1();
deselect();
return response;
}
/**
* Sends CMD58 to read the OCR register and reads the R3 response
* into the given array of 5 bytes.
*
* @param R3
*/
static void sendOCR(uint8_t *response) {
select();
command(CMD58, CMD58_ARG, CMD58_CRC);
readR3_7(response);
deselect();
}
/**
* Sends ACMD41 to start initialization and returns the R1 response.
*
* @return R1
*/
static uint8_t sendOpCond(void) {
select();
command(ACMD41, ACMD41_ARG, ACMD41_CRC);
uint8_t response = readR1();
deselect();
return response;
}
bool initSDCard(void) {
uint8_t response[5];
// power on
powerOn();
// CMD0 - go to idle state
response[0] = sendIdle();
if (response[0] > 0x01) {
printString("SD card error 0\r\n");
return false;
}
// CMD8 - send interface condition
sendIfCond(response);
if (response[0] & (1 << SD_CMD_ILLEGAL)) {
printString("SD card is V1.x or not SD card\r\n");
return false;
} else if (response[0] > 0x01) {
printString("SD card error 8\r\n");
return false;
} else if (response[4] != 0xaa) {
printString("SD card echo pattern mismatch\r\n");
return false;
}
// initialize to ready state
uint8_t attempts = 0;
do {
if (attempts > 100) {
printString("SD card did not become ready\r\n");
return false;
}
// CMD55 - send app command
response[0] = sendApp();
if (response[0] < 0x02) {
// ACMD41 - start initialization
response[0] = sendOpCond();
}
_delay_ms(10);
attempts++;
} while (response[0] != SD_SUCCESS);
// CMD58 - send operation conditions register
sendOCR(response);
if (response[0] > 0x01) {
printString("SD card error 58\r\n");
return false;
} else if (!(response[1] & 0x80)) {
printString("SD card not ready\r\n");
return false;
}
printString("SD card ready\r\n");
return true;
}
bool readSingleBlock(uint32_t address, uint8_t *block) {
select();
command(CMD17, address, CMD17_CRC);
uint8_t response = readR1();
uint8_t token = 0xff;
bool success = false;
if (response == SD_SUCCESS) {
// read command was successful, wait for start block token
for (uint16_t attempt = 0; attempt < SD_MAX_READ && token == 0xff; attempt++) {
token = transmit(0xff);
}
if (token == SD_START_BLOCK) {
// start block token received, 512 data bytes follow
for (uint16_t i = 0; i < SD_BLOCK_SIZE; i++) {
block[i] = transmit(0xff);
}
// 16-bit CRC (ignore for now)
transmit(0xff);
transmit(0xff);
success = true;
}
}
deselect();
return success;
}
bool readMultiBlock(uint32_t address, Consumer consume) {
select();
command(CMD18, address, CMD18_CRC);
uint8_t response = readR1();
bool success = false;
bool cont = false;
uint8_t block[SD_BLOCK_SIZE];
if (response == SD_SUCCESS) {
// read command was successful
do {
// wait for start block token
uint8_t token = 0xff;
for (uint16_t attempt = 0; attempt < SD_MAX_READ && token == 0xff; attempt++) {
token = transmit(0xff);
}
if (token == SD_START_BLOCK) {
// start block token received, 512 data bytes follow
for (uint16_t i = 0; i < SD_BLOCK_SIZE; i++) {
block[i] = transmit(0xff);
}
// 16-bit CRC (ignore for now)
transmit(0xff);
transmit(0xff);
cont = consume(block);
} else {
break;
}
} while (cont);
deselect();
select();
command(CMD12, CMD12_ARG, CMD12_CRC);
// stuff byte on CMD12?
transmit(0xff);
response = readR1();
if (response == SD_SUCCESS) {
// wait for not busy
uint8_t busy = 0x00;
for (uint16_t attempt = 0; attempt < SD_MAX_READ && busy == 0x00; attempt++) {
busy = transmit(0xff);
}
success = busy != 0x00;
}
}
deselect();
return success;
}
bool writeSingleBlock(uint32_t address, uint8_t *block) {
select();
command(CMD24, address, CMD24_CRC);
uint8_t response = readR1();
uint8_t token = 0xff;
bool success = false;
if (response == SD_SUCCESS) {
// write command was successful, send start block token
transmit(SD_START_BLOCK);
// write 512 data bytes
for (uint16_t i = 0; i < SD_BLOCK_SIZE; i++) {
transmit(block[i]);
}
// wait for data response
for (uint16_t attempt = 0; attempt < SD_MAX_WRITE && token == 0xff; attempt++) {
token = transmit(0xff);
}
if ((token & 0x0f) == 0x05) {
// data was accepted, wait while busy programming data
for (uint16_t attempt = 0; attempt < SD_MAX_WRITE && token == 0x00; attempt++) {
token = transmit(0xff);
}
success = true;
}
}
deselect();
return success;
}
