/*
 * avrrfm.c
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation, version 2.
 *
 * Experimental project to drive an RFM69HCW radio.
 *
 * Created on: 27.01.2025
 *     Author: torsten.roemer@luniks.net
 *
 */

#include <stdbool.h>
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <avr/io.h>
#include <avr/interrupt.h>
#include <avr/pgmspace.h>
#include <util/delay.h>

#include "pins.h"
#include "usart.h"
#include "spi.h"
#include "utils.h"
#include "rfm69.h"

/**
 * Sets up the pins.
 */
static void initPins(void) {
    // set MOSI and SCK as output pin
    DDR_SPI |= (1 << PIN_MOSI);
    DDR_SPI |= (1 << PIN_SCK);
    // drive SS (ensure master) and MISO high
    PORT_SPI |= (1 << PIN_SS);
    PORT_SPI |= (1 << PIN_MISO);

    // set SDA and SCL as output pin
    // DDR_I2C |= (1 << PIN_SCL);
    // DDR_I2C |= (1 << PIN_SDA);

    // set radio CS and RST pin as output pin
    DDR_RFM |= (1 << PIN_RCS);
    DDR_RFM |= (1 << PIN_RRST);
    
    // drive output pins high
    PORT_RFM |= (1 << PIN_RCS);
}

/**
 * Enables SPI master mode.
 */
static void initSPI(void) {
    SPCR |= (1 << MSTR);
    SPCR |= (1 << SPE);
}

/**
 * Enables I2C.
 */
static void initI2C(void) {
    // 100 kHz @ 16 MHz
    TWBR = 72;
    TWCR |= (1 << TWEN);
}

/**
 * Enables radio interrupt.
 */
static void initRadioInt(void) {
    EIMSK |= (1 << INT0);
    // EICRA |= (1 << ISC00); // interrupt on any logical change
    // EICRA |= (1 << ISC01); // interrupt on falling edge
    EICRA |= (1 << ISC01) | (1 << ISC00); // interrupt on rising edge
}

int main(void) {
    initUSART();
    initPins();
    initSPI();
    initI2C();
    initRadioInt();

    // enable global interrupts
    sei();
    
    printString("Hello Radio!\r\n");
    
    initRadio(868600);
    // sendByte(0x7b);
    // sendString("Hello Radio!");
    
    while (true) {
        // transmitByte(0x7b);
        // _delay_ms(1000);
        receiveByte();
    }

    return 0;
}